Jarlo CYTJ102/2mining hydraulic tunnel drilling rig is suitable for blasting drilling in underground mines, tunnels and underground factory excavations. The maximum working area is 45m2(the maximum width is 8.72 meters and the maximum height is 6.35 meters),the drilling aperture diameter is 41 -102m.The double-arm design can greatly improve the drilling efficiency and the automatic unscrewing system allows one operator to operation two sets of arms; The hydraulic parallel mechanism of the boom can achieve fast and accurate positioning; the diesel-electric dual power system does not produce exhaust gas during operation and takes into account the need for rapid transition.
- Technical Performance
1.1 Rock Drill The CYTJ102/2 mining hydraulic tunnel drilling rig is equipped with a double buffering and shock-absorbing system to ensure the best service life of the drilling tool;
The pressure oil film protects and lubricates the joint interfaces and reduces internal pollution of the rock drill.
1.2 Hydraulic Drill Boom Two sets of heavy-duty drill boom, the drill boom supported by double triangle suspension provides accurate hydraulic parallel maintenance function in all directions.
1.3 Hydraulic Propulsion Beam
Heavy-duty aluminum alloy propulsion beam has high anti-bending and torsional strength and long service life;
The surface of the propulsion beam is covered with stainless steel skin, and polyurethane rubber wear-resistant pads are used between moving parts.
1.4 Control SystemThe hydraulic rock drilling control system has an automatic anti-jamming function RPCF (rotary pressure control force).
1.5 ChassisSturdy articulated heavy-duty chassis, four-wheel drive; powered by a water-cooled diesel engine; four hydraulic outriggers for firm stability.
1.6 Other ConfigurationLift-able safety roof to prevent impact from falling objects; cable reel; electrically driven piston air compressor; electrically driven booster water pump (hydraulic booster water pump can also be customized); working light.
2.Technical Specifications
2.1 1838ME Rock Drill×2
| Shank Adapter |
R32/R38/T38 |
| From drill top to the center |
88 mm |
| Length (Except shank adapter) |
1008 mm |
| Impact power |
18 kW |
| Impact frequency |
60 Hz |
| Hydraulic system (Max.) |
200 bar |
| Rotation system |
Independent rotating |
| Rotation speed |
0-300 rpm |
| Rotation torque (Max.) |
640/1000 Nm |
| Lubrication air consumption (2 bar/hour) |
5 L/s |
| Weight |
176 kg |
| Water consumption |
100-120 L/m |
| Noise level |
<106 dB(A) |
2.2 Propulsion Beam×2
| |
JARLO2337 |
JARLO2343 |
| Total length |
5287 mm |
5897 mm |
| Bolting rod length |
3700 mm |
4310 mm |
| Aperture length |
3405 mm |
4015 mm |
| Weight |
495 kg |
525 kg |
| Propulsion power |
15 kN |
15 kN |
2.3 Drill Arm×2
| Propulsion beam compensation |
1250 mm |
| Drill arm extension |
1250 mm |
| Parallel holding |
Complete |
| Propulsion beam rotation |
360˚ |
| Drill arm lifting angle (Max.) |
+65˚ /-30˚ |
| Drill arm swing angle (Max.) |
Outer 45˚/Inner 25° |
| Drill arm self weight |
1750 kg |
2.4 Air System
| Electrical boosted piston air compressor |
ET80 |
| Max. Output volume 0.8MPa/h |
16L/min |
| Air pressure gauge |
0-1.6MPa |
2.5 Water System
| Booster water pump |
BLT8-16 |
| Maximum flow rate when pressurized to 12 bar |
8m³/h |
| The pressure at the smallest entrance |
2 bar |
2.6 Control SystemDirectly controlled hydraulic system DCS; basic functions include automatic anti-jamming.
2.7 Electrical System
| Total Power |
128 kW |
| Main Motor |
2 x 55 kW |
| Voltage |
380 V |
| Frequency |
50 Hz |
| Starting mode |
Star shape/Triangle |
| Drill arm swing angle (Max.) |
1280 mm |
| Configuration: motor thermal overload protection, impact timer, digital voltage/ammeter, leakage ground protector, charger |
2.8 Hydraulic System
| Hydraulic pump set |
Two set |
| System pressure |
150 - 230 bar |
| Hydraulic tank, maximum volume |
200 L |
| Hydraulic oil filtration accuracy |
10 μm |
| Configuration: Pump unload start, oil temperature gauge, manual hydraulic oil filling pump, hydraulic oil filter indicator light, low oil level indicator light, water-cooled hydraulic oil cooler, mineral-based hydraulic oil. |
2.9 Chassis
| Diesel engine |
YC |
| Rated engine power/ rotating speed |
88 kW/2400rpm |
| Four-wheel drive, articulated steering |
±41˚ steering angle |
| Tyre |
12.00-20 Solid Tyre |
| Approaching angle |
18˚ |
| Departing angle |
18˚ |
| Deploy-able front hydraulic outriggers |
2pcs |
| Rear hydraulic outrigger |
2pcs |
| Fuel tank volume |
50 L |
| Electrical System |
24 V |
| Battery |
2 x 12v, 60 Ah |
| Driving lights |
LED 8 x 45 W, 24V |
| Task light |
LED 4 x 108 W, 24V |
| Gradeability |
18° |
| Configuration: service brake, emergency stop and parking brake, exhaust catalytic purification device, muffler, brake light, fire extinguisher, chassis centralized lubrication system. |
3. Physical Parameters
3.1 Overall Size
Side View
Working Scope
Size:mm
| Maximum width |
1900 |
| Roof height (raise/lower) |
2385/3085 |
| Length, with JARLO2343 propulsion beam |
11830 |
| Ground clearance |
340 |
3.2 Total Weight:18000kg
3.3 Driving Speed km/h
| On flat road (rolling resistance coefficient 0.05) |
7km/h~16 km/h |
3.4 Turning Radius
|
|
Audited Supplier 
){kind=link}